Since I only have a single IDE CD-ROM and single hard disk to show you today (as well as only a single physical IDE connector on my motherboard), I’ve opted to make the hard disk as Master and the CD-Drive as sl
Also make sure that you have the fan mounted so it blows in the proper direction. The fan should have a printed or molded arrow that shows the direction air flows. Fans can be installed as either an intake (air blowing in) or exhaust (air blowing out). There may also be an arrow that shows the direction of s
Now you may be wondering – what is the difference between three and four-pin connections? It’s all about a feature called Pulse Width Modulation. With this feature, which is enabled through the fourth pin, a computer can control the speed of a fan connected to its motherboard. Having this is nice because the fan can automatically adjust its speed based on internal temperatures or user pres
The fan you purchased should come with at least four screws. These are usually short and stubby like the one in the photo below. However, the screws may be longer if they are meant to install alongside another piece of hardware, such as a radiator used in a liquid-cooling syst
The way this setup works includes a web server with Subsonic installed. Technically, you don’t need to set up a web server – when you install Subsonic , it will use port 80 and serve up its own webpage. If you already have a web server, you can configure Subsonic to use its own subfolder within the public html fol
With your Raspberry Pi desktop computer up and running, you will no doubt want to use particular applications. Office, email and web browsing apps are all available for the Pi. Some are included – but would you want to use t
The default browser in Raspbian is Chromium, which is more or less able to run pages with JavaScript, AJAX and Flash. Alternatives are available, but the this version of the browser is optimised for the Pi, so using it makes sense. If you’re experiencing performance issues, however, try disabling JavaScr
After all, a massive amount of data is handled by Steams servers—usually the service is up to the task. Just check this live graph of Steam’s bandwidth over the past 48 hours . You can drill down through the data to select regions, and even see which ISP provides the biggest bandwi
For the CD-ROM, the diagram indicates that 2 is Slave setting. What does this mean? Well, looking at the back of the device, we have 3 pairs of pins. So, to make it a slave device, I place a jumper over the central (second) p
The hard disk is similar, but this time I chose ” Master with Slave Present “. Then I connect the cable up, bearing in mind that the hard drive as the master should be connected to the centre of the cable, with the slave CD-ROM drive being added at the
Always check how a new piece of hardware will connect to your motherboard. The most common connections are SATA (for hard drives and optical drives) and PCI Express (for video cards, sound cards and network adapters), but there are oth
The measurement is the size of the fan on each side. Just break out a tape measure if you’re not sure what size you need. Fans for purchase should be clearly labeled by size and the size is universal, which means fans from different companies will fit into the same mounting bracket as long as the size matc
I was asked recently why I find the Raspberry Pi so fascinating. After all, it doesn’t run popular MMORPGs, it can’t easily be used as a portable computer and it’s not ideal for things like multimedia production. When I pointed out the possibilities such as retro gaming and building a compact media centre, my friend confidently reminded me that standard desktops and laptops and even phones can do the same thi
All you need to complete installation is power. The fan will come with a three or four-pin female connector like that shown in the picture above. This needs to be plugged into a three or four-pin male adapter located either on the motherboard or power supply. The connector on a motherboard looks like
Well, I hope that’s explained the whole IDE thing a bit more clearly. Once you’ve got it in, don’t forget to format the drive (or learn about what a filesystem is ). If you’re up for a more up to date and practical guide on adding a hard drive to your computer, my guide to SATA drives is probably more relev
Once you have Subsonic running, you can either access the system by going to ” http://localhost/ ” on the PC itself, or open up a browser on any other computer on your Wi-Fi network and type in the IP address of the server PC where Subsonic is runn
Installing a new cooling fan is often the best way to decrease heat. It also can be a good way to reduce noise (if the replacement fan is quieter, of course). Adding a fan is one of the easier upgrades a user can perf
Internet Service Providers (ISPs) also throttle traffic from Steam and other providers. They do this to prioritize specific data types, such as online shopping and social networking over high bandwidth activities such as online gaming hardware updates|https://pcbuildinsight.com/, downloading, and video stream