You can carefully vacuum the keyboard to remove loose particles and dust. Afterwards, wipe the keys with a lint-free cloth that is lightly dampened. Finally, disinfect the keyboard using alcohol wipes or spray some alcohol-containing cleaner on your cloth. If the keyboard is seriously manky, you can also take it apart and wash the keys in bulk. Be sure to take a photo of the keyboard first, so that it’s easier to re-assem
Overall power draw can sometimes be an issue, as well. Video cards are the primary troublemaker. Be sure to check the power requirements specified by the manufacturer before buying a new video card. If your current supply is below the requirements you should upgrade it before installing new hardw
Find the physical measurements of any Hardware compatibility guide|https://Pcbuildinsight.com/ that you plan on installing and use a tape measure to make sure that you have room. Be sure to account for not only the width of new hardware but also its depth. Some cases have thin profiles that will only fit “half-height” PCI Express cards. Processor coolers are another common troublemaker, as the most effective air-cooled models tend to have extremely large heatsinks that are as tall as the typical mid-tower PC case is w
How exactly this is done depends on your computer model. I recommend searching Google and YouTube and I’m sure you will find instructions. Generally, you can expose your computer fans, then use a vacuum cleaner or canned air to remove dust, and a damp cloth to wipe it down. Do the same for the intake grills and vents. DO NOT remove the heat sink unless you are prepared to replace the thermal compo
This isn’t really anything too special, considering that you can just connect to those video or podcast streams yourself, but by adding all of those media stream links to your Subsonic server, you can keep everything organized on one computer system and then access it from anywhere. No longer will you have to wonder where you saved that podcast link, or where you saved that music file that you downloaded. Just log into your Subsonic server and it’s all th
Power for system components will come from either a regular molex 4 pin, or SATA style plug for SATA devices. Case fans will often come with daisy chain connectors for regular molex power plugs, like t
IDE was a significant limiting factor in older PCs. Though modern machines will often include a single IDE connection for the sake of backwards compatibility, most machines from the IDE era of computing were equipped with two IDE sockets – each connection being referred to as an IDE “channel”. On each channel, you could add up to 2 IDE devices – so that meant a maximum of 4 hard drives and/or CD-ROM dri
You can even add a special Guest account for people that visit your home and have a laptop or mobile device that can connect to your home Wi-Fi network. What’s especially cool about Subsonic is that it’s available for multiple platforms, and there are even Subsonic apps for Android, iPhone and Windows Mob
You may find your power supply doesn’t match up if your case is particularly old and you’re trying to use it with a newish motherboard. Older PSUs have only 20 pins, while newer ones have 24. You can see the difference in this ph
Let’s look at some standard IDE cables and connectors. There are 3 identical looking connectors – one at either end and one in the middle. However, one of the gaps between the end connectors and the middle connector is longer – this is the end that plugs into your motherbo
The hard disk is similar, but this time I chose ” Master with Slave Present “. Then I connect the cable up, bearing in mind that the hard drive as the master should be connected to the centre of the cable, with the slave CD-ROM drive being added at the
2. The cable length will affect your choice too, as IDE cables are usually quite short. If the CD-ROM is far from the hard drives, you will need one cable for the hard drives, and another going to the CD-
Also make sure that you have the fan mounted so it blows in the proper direction. The fan should have a printed or molded arrow that shows the direction air flows. Fans can be installed as either an intake (air blowing in) or exhaust (air blowing out). There may also be an arrow that shows the direction of s
This is probably the hardest step of all. Before securing the motherboard to the case, I made sure to write down a quick diagram of the jumper pins for the case switches and LEDs as they’re difficult to see once the motherboard is in place. These can be found on the bottom left, if you were looking down into the machine, and they look like t
Once you have Subsonic running, you can either access the system by going to ” http://localhost/ ” on the PC itself, or open up a browser on any other computer on your Wi-Fi network and type in the IP address of the server PC where Subsonic is runn
The power cable you will plug in has four female plugs in it, and will only go in one way due to the shape of it, so that shouldn’t be too hard. Take a look at one of your other devices to work out which the power cables are in your case. The IDE connector is also easy, the same as the motherboard it has a notch in it which you can al